Trough chain conveyors
  • Trog 1
  • Trog 2

Trough chain conveyors

 

 

 

Big285681a03b0c84d2d8

Trough chain conveyors are conveyor systems suitable for the conveyance of bulk goods. In a closed trough a conveyor chain with flights transports the material to be conveyed. Each SMD trough chain conveyor is designed individually. In doing so the production of a reliable, easy-to-maintain constructed plant with a long operational life is our goal. This is realized by the usage of appropriate materials and an optimal layout of the line. The layout of the line can be horizontally, vertically or ascending. The trough chain conveyor consists of the construction units drive station and tensioning station, a trough section and a conveyor chain with flights interminable rotating within the trough section.

 

Big285681a03b0c84d2d3

Our drive- and tensioning stations are constructed easy to maintain. The housing of our drive station is designed devisible. This facilitates the replacement of the drive shaft during inspection. Likewise the complete shaft including chain wheels and bearings can be removed from the housing of the tensioning station. The individual plates of the SMD chain wheels are devisible. This minimizes the assembly effort and reduces the idleness of the plant.

For easy access during inspections and revisions all station covers are equipped with safeguarded quick-locking mechanisms. By using exterior pedestrial bearings we reliably prevent the intrusion of conveyed materials into the bearing location. Monitoring devices such as speed monitors and chain break- and chain tension surveillance are also comprised in our scope of supply. Due to the closed construction of the trough no materials conveyed can escape into the environement.

Big285681a03b0c84d2d6

For easy access during inspections and revisions all trough covers can be taken off. In order to prevent extreme abrasion on the trough bottom a wear-resistent material coating can be installed optionally. Possibly installed guide wear rails can be screw-fastened to ensure a fast exchange. User-defined material discharge points are possible anywhere along the trough section and can be shut by the SMD slide gate.

Big285681a03b0c84d2d8

The SMD trough chain conveyor can be supplied in a dustproof, pressure-tight version. The SMD trough chain conveyors are constructed as one-strand or two-strand conveyors with forged fork link chains. The SMD trough chain conveyor can be used multi-functionally. Wheel flakes, wet and dry sludge, tree bark, wood chips, slag, ash, fluff or wood left-overs can be reliably conveyed in different grain sizes.

 


 

Submerged chain conveyor

 

 

 

Big285681a03b0c84d2d8

The SMD Similar to the SMD trough chain conveyor the submerged chain conveyor is designed individually. It can be used for the transport of any kind of combustion residues. It is compact, low-noise, highly wear-resistent and easy to maintain.

Similar to the SMD trough chain conveyor the submerged chain conveyor is designed individually. In doing so the manufacturing of a reliable, easy-to-maintain plant guaranteeing a long service life is our goal. This is realized by the usage of appropriate materials and an optimal layout of the line. In the material charging area(s) the layout of the lines are most horizontally, ascending to the material discharge point. The ascending trough section also serves as a drainage line.

 

Big285681a03b0c84d2d3

The SMD submerged chain conveyor consists of the construction units drive station and tensioning station, a trough sestion and a conveyor chain with flights interminable rotating within the trough section. Our drive- and tensioning stations are designed easy to maintain. The housing of the drive station is constructed devisible. This facilitates the replacement of the drive shaft during inspection. Likewise the complete shaft including chain wheels and bearings can be removed from the housing of the tensioning station. The tensioning station can be constructed below or equipped with an additional trough- above the water line.

Big285681a03b0c84d2d6

The individual plates oft he SMD chain wheels are devisible. This minimizes the assembly effort and reduces the idleness of the plant. By using exterior pedestrial bearings we reliably prevent the intrusion of conveyed materials into the bearing location. Monitoring devices such as speed monitors and chain break- and chain tension surveillance are also comprised in our scope of supply. Due to the closed construction of the trough section no materials conveyed or water vapour can escape into the environement. For easy access during inspections and revisions all trough covers are equipped with safeguarded quick-locking mechanisms. In order to prevent extreme abrasion on the trough bottom a wear-resistent material coating can be installed optionally. The submerged chain conveyor is equipped with a water tank. The automated water feeding and spillway is located herein. For emptying the SMD submerged chain conveyor is constructed with a drainage nozzle with slider.

Big285681a03b0c84d2d8

SMD submerged chain conveyor is designed as one strand- or two strand conveyor with forged fork link chains. It is applied in block heat and power plants, biomass combustors (matured timber, timber, bio-waste) and incineration plants (household waste, special waste), coal-burning power plants and other plants.